Turbo Install Kits

Protect your new turbo with a complete install kit matched to your vehicle. Turbo install kits include the gaskets, studs, nuts, crush washers, and O-rings needed for a clean, leak-free installation, and many also include new oil feed and drain lines. Gaskets and seals are one-time-use parts, and old oil lines can hide debris or coked oil that starves a new turbo on first start. Installing fresh hardware is one of the simplest ways to prevent early turbo failure and leaks. Shop by year, make, model, and engine to find the right kit for your turbo replacement or upgrade.

• Gaskets and seals don't seal twice. Multi-layer steel gaskets, crush washers, and O-rings deform to seal on the first install. Reused parts commonly leak oil or exhaust.
• Old oil lines can starve a new turbo. Feed lines can hold debris from the old turbo's failure or carbon from coked oil. Some factory feed lines include filter screens that clog. Oil starvation in the first few seconds can damage new bearings.
• Old fasteners lose clamping force. Exhaust studs and nuts commonly corrode, stretch, or seize. Fresh hardware helps hold correct clamping force through heat cycles.

How do I choose a turbo install kit?

• Match your exact vehicle and turbo. Gasket shapes, stud sizes, and oil fittings vary by engine and model year, and sometimes change when you switch from an OE turbo to an upgraded one. Confirm year, make, model, and engine. [VERIFY: fitment per SKU]
• Decide on oil lines. If your old turbo failed from oil supply problems, or if the lines are original and high mileage, choose a kit with new feed and drain lines.
• Check for coolant lines. Water-cooled turbos need sound coolant connections. Choose a kit with coolant line seals or lines if yours are aged.
• Match upgrade turbos. Upgraded or performance turbos may use different flanges or fittings than stock. Use the install kit specified for that turbo.