Brands
Front Mount Intercooler Kit, Black, fits Subaru WRX 2015-2021
SKU: MMINT-WRX-15BK
$1,787.00
$1,624.95
CARB Compliant
Free Shipping
USA with flag
| Core Color | Black |
| Grade Type | Performance |
| Pipe Color | Black |
| Core Height | 8.05 |
| Core Length | 28 |
| OptionLabel | Black |
| Pipe Finish | Powder Coated |
| Core Material | Aluminum |
| Coupler Color | Black |
| Pipe Material | Aluminum |
| TechSpec Note | This kit does not fit with fog light equipped vehicles----Mishimoto recommends that this intercooler kit, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.----This kit is rated for approximately 600 whp during normal operating conditions. Maximum horsepower potential will be near 700 whp. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.----This front-mount intercooler kit will not fit with the Mishimoto 2015+ WRX oil cooler kit----This front-mount intercooler kit will not fit with the Mishimoto 2015+ WRX oil cooler kitThis kit is not compatible with some air-oil separator kits. |
| CARB EO Number | D-759 |
| Core Thickness | 3.5 |
| Inlet Diameter | 2.45 |
| Outlet Diameter | 2.75 |
| Coupler Material | Silicone |
| Intercooler Type | Air-to-Air |
| Core Construction | Bar-and-Plate |
| End Tank Material | Aluminum |
| TechSpec Includes | (1) Bar-and-Plate Intercooler--(1) Steel Crash Bar w/Mounting Hardware--(2) Hot-Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(1) Air Intake Bracket--(1) 2.25-in 45-degree Coupler--(1) 2.25-in to 2.75-in 45-degree Transition Coupler--(1) 2.5-in to 2.75-in 55 -degree Transition Coupler--(1) 2.5-in to 2.75-in 65 -degree Transition Coupler--(1) 3.00-in Straight Coupler--(1) BPV Recirculation Hose--(1) BPV Vacuum Hose--(1) 30-45mm Worm Gear Clamp--(2) 1.75-in T-bolt Clamps--(3) 2.5-in T-bolt Clamps--(2) 2.75-in T-bolt Clamps--(5) 3-in T-bolt Clamps--Mishimoto Lifetime Warranty |
| Install Difficulty | 4 |
| Maximum Horsepower | 600 |
| TechSpec Core Type | Bar-and-Plate |
| TechSpec Inlet (in) | 2.45 |
| Hose Clamps Included | Yes |
| TechSpec Outlet (in) | 2.75 |
| End Tank Construction | Cast |
| TechSpec Applications | 2015-2021 Subaru WRX |
| TechSpec Engine Codes | FA20DIT |
| Maximum Boost Pressure | 30 |
| TechSpec Chassis Codes | VA |
| TechSpec Core Height (in) | 8.05 |
| TechSpec Core Length (in) | 28 |
| Universal Or Specific Fit | Specific |
| TechSpec Overall Width (in) | 5.4 |
| TechSpec Core Thickness (in) | 3.5 |
| TechSpec Overall Height (in) | 8.6 |
| TechSpec Overall Length (in) | 37.7 |
| Hot Side Pipe Inside Diameter | 2.45 |
| Cold Side Pipe Inside Diameter | 2.75 |
| TechSpec Maximum Recommended Horsepower | 600 |
| TechSpec Maximum Recommended Boost Pressure (PSI) | 30 |
